logo
পণ্য
পণ্যের বিবরণ
বাড়ি > পণ্য >
IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

MOQ: 1
মূল্য: Customized
স্ট্যান্ডার্ড প্যাকেজিং: রপ্তানি প্যাকেজ
প্রসবের সময়ের: 5 দিন
মূল্যপরিশোধ পদ্ধতি: টি/টি
সরবরাহ ক্ষমতা: প্রতি মাসে 100 সেট
বিস্তারিত তথ্য
উৎপত্তি স্থল
চীন
পরিচিতিমুলক নাম
Sinuo
সাক্ষ্যদান
Calibration Certificate(Cost Additional )
মডেল নম্বার
SN446B
কমপ্লায়েন্স স্ট্যান্ডার্ড:
আইইসি 60529-2013 চিত্র 5
আইপি কোড:
IPX3 এবং IPX4
নল নকশা:
121 গর্ত (Ø0.5 মিমি)
অগ্রভাগ উপাদান:
পিতল
জল প্রবাহ:
10 এল/মিনিট ± 5%
চাপ পরিসীমা:
50~150Kpa
পণ্যের বর্ণনা

 

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

 

 

Product information:

 

It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.

The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.

 

Technical parameters:

 

Spray Nozzle Dimensions:Outer Ø102mm, spherical Ø75.5mm
Holes:121 (1 center, 2 inner rings of 12 holes @30°, 4 outer rings of 24 holes @15°), all Ø0.5mm
Material:Brass
Water Flow 10L/min ±5% (adjustable via flow meter)
Pressure 50–150 kPa (gauge range: 0–0.25 MPa)
Moving Shield

Material: Aluminum (detachable)

Note: Handle with care to avoid deformation

 

 

Structure:

 

This device is manufactured in accordance with IEC 60529, Figure 5. Equipped with a digital flowmeter and a handle-mounted pressure gauge, it enables IPX3/IPX4 hand-held spray testing when connected to a water pipe (to be provided by the user). By regulating the water supply flow, the system ensures that the spraying and splashing rate meets the standard requirements, allowing the specimen’s enclosure to be uniformly splashed from all directions.

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 0IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 1

প্রস্তাবিত পণ্য
IPX5 IPX6 Water Jet Test System For Waterproof Rating IEC 60529 ভিডিও
পণ্য
পণ্যের বিবরণ
IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5
MOQ: 1
মূল্য: Customized
স্ট্যান্ডার্ড প্যাকেজিং: রপ্তানি প্যাকেজ
প্রসবের সময়ের: 5 দিন
মূল্যপরিশোধ পদ্ধতি: টি/টি
সরবরাহ ক্ষমতা: প্রতি মাসে 100 সেট
বিস্তারিত তথ্য
উৎপত্তি স্থল
চীন
পরিচিতিমুলক নাম
Sinuo
সাক্ষ্যদান
Calibration Certificate(Cost Additional )
মডেল নম্বার
SN446B
কমপ্লায়েন্স স্ট্যান্ডার্ড:
আইইসি 60529-2013 চিত্র 5
আইপি কোড:
IPX3 এবং IPX4
নল নকশা:
121 গর্ত (Ø0.5 মিমি)
অগ্রভাগ উপাদান:
পিতল
জল প্রবাহ:
10 এল/মিনিট ± 5%
চাপ পরিসীমা:
50~150Kpa
ন্যূনতম চাহিদার পরিমাণ:
1
মূল্য:
Customized
প্যাকেজিং বিবরণ:
রপ্তানি প্যাকেজ
ডেলিভারি সময়:
5 দিন
পরিশোধের শর্ত:
টি/টি
যোগানের ক্ষমতা:
প্রতি মাসে 100 সেট
পণ্যের বর্ণনা

 

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5

 

 

Product information:

 

It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.

The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.

 

Technical parameters:

 

Spray Nozzle Dimensions:Outer Ø102mm, spherical Ø75.5mm
Holes:121 (1 center, 2 inner rings of 12 holes @30°, 4 outer rings of 24 holes @15°), all Ø0.5mm
Material:Brass
Water Flow 10L/min ±5% (adjustable via flow meter)
Pressure 50–150 kPa (gauge range: 0–0.25 MPa)
Moving Shield

Material: Aluminum (detachable)

Note: Handle with care to avoid deformation

 

 

Structure:

 

This device is manufactured in accordance with IEC 60529, Figure 5. Equipped with a digital flowmeter and a handle-mounted pressure gauge, it enables IPX3/IPX4 hand-held spray testing when connected to a water pipe (to be provided by the user). By regulating the water supply flow, the system ensures that the spraying and splashing rate meets the standard requirements, allowing the specimen’s enclosure to be uniformly splashed from all directions.

IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 0IPX3 And IPX4 Water Ingress Testing For Lighting Fixtures IEC 60529 Figure 5 1

সাইট ম্যাপ |  গোপনীয়তা নীতি | চীন ভালো গুণমান বৈদ্যুতিক সরঞ্জাম পরীক্ষার সরঞ্জাম সরবরাহকারী। কপিরাইট © 2019-2025 Sinuo Testing Equipment Co. , Limited . সব সর্বস্বত্ব সংরক্ষিত.